Tripp Lite SMX5000XLRT3U 5000VA Intl UPS Smart Pro Rack/Tower Line-Interactive 5kVA 230V 11 outlets

Tripp Lite SMX5000XLRT3U 5000VA Intl UPS Smart Pro Rack/Tower Line-Interactive 5kVA 230V 11 outlets

The Tripp Lite Tripp Lite SMX5000XLRT3U 5000VA line interactive UPS system for server, network and telecommunications equipment. 5kVA UPS with internal batteries installs in only 3 rack spaces with a depth of only 635mm / 25 inches. High 98% line-power efficiency rating reduces energy consumption and BTU heat output. Expandable battery runtime with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible) external battery packs. Uninterruptible Power Supply (UPS) switches to battery derived AC output during power failures and extreme voltage variations. Line interactive Automatic Voltage Regulation (AVR) offers voltage boost during brownouts and voltage reduction during overvoltage conditions to maintain regulated 230v output over an input range of 170-282V.

Supports hardwire input. Includes C19 and C13 output receptacles. Network-grade AC surge and noise suppression. Network management interfaces support communications via USB, DB9 serial and slot for network management card options. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once.

PowerAlert UPS monitoring software is available via free download. Emergency Power Off (EPO) interface. 3-stage metered current monitoring and battery charge status LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 4-post rackmount installation accessories included; 2-9USTAND tower kit and 2POSTRMKITHD two post rack mounting accessories available. Field-replaceable, hot-swappable internal batteries and external battery packs.

Product Features

• 5kVA / 5000VA line interactive 3U rack/tower UPS; Sine wave output
• 230V nominal output during brownouts to 170V and overvoltages to 282V
• USB, Serial, EPO & slot for Network Management Card options
• 3U all-in-one chassis; 98% efficiency
• Hardwire input; 8 C13 & 3 C19 outlets

Product Specifications

Output

• Output Volt Amp Capacity (VA): 5000
• Output kVA Capacity (kVA): 5
• Output Watt Capacity (Watts): 3750
• Output kW Capacity (kW): 3.75
• Power Factor: 0.75
• Nominal Output Voltage(s): Supported 220V; 230V; 240V
• Nominal Voltage Details: 230v nominal inverter output voltage
• Frequency Compatibility: 50 / 60 Hz
• Frequency Compatibility: Details Automatic frequency selection
• Output Voltage Regulation (Line Mode): -17%, +8%
• Output Voltage Regulation (Battery Mode): +/- 5%
• Output Receptacles: (8) C13; (3) C19
• Included Output Power Cables Includes: 3 C13 to C14 output power cables
• Output Circuit Breakers: 15A (x3) breaker supports 1 C19 outlet each, 10A (x2) breaker supports 4 C13 outlets each
• Output AC Waveform (AC Mode): Sine wave
• Output AC Waveform (BatteryMode): Pure Sine wave

Input

• Rated input current (Maximum Load): 27A
• Nominal Input Voltage(s): Supported 230V AC
• UPS Input Connection Type: Hardwire
• UPS Input Connection Description: Hardwire input supports International 230V input (L, N, PE)
• Input Phase: Single-Phase

Battery

• Full Load Runtime (min.): 8.5 min. (3750w)
• Half Load Runtime (min.): 20 min. (1875w)
• Expandable Battery Runtime: Extended runtime supported via optional external battery packs
• DC System Voltage (VDC): 48
• Battery Recharge Rate (Included Batteries): Less than 4 hours from 10% to 90% (typical, full load discharge)
• Internal UPS Replacement Cartridge: Battery
• Battery Access: Front panel battery access door
• Battery Replacement Description: Hot-swappable, user replaceable batteries

Voltage Regulation

• Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 170 to 282
• Overvoltage Correction: Input voltages between 245 and 282 are reduced by 12%
• Undervoltage Correction: Input voltages between 170 and 199 are boosted by 12%

User Interface. Alerts & Controls

• Switches: 2 Switches control off/on power status and alarm-cancel/self-test operation
• Alarm: Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate lowbattery status
• Audible Alarm: Audible alarm indicates power-failure, overload and low-battery conditions
• LED Indicators: 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

Physical

• Installation Form Factors: Supported
• with Included Accessories: 4 post 19 inch rackmount
• Installation Form Factors: Supported with Optional Accessories: 2 post rackmount (2POSTRMKITHD); Tower (2-9USTAND)
• Primary Form Factor: Rackmount
• UPS Power Module Dimensions (hwd, in.): 5.2 x 17.5 x 25
• UPS Power Module Dimensions (hwd, cm): 13.21 x 44.45 x 63.50
• Rack Height: 3U
• UPS Power Module Weight (lbs.): 143
• UPS Power Module Weight (kg): 64.86
• Shipping Dimensions (hwd / in.): 11.25 x 22.52 x 31.50
• Shipping Dimensions (hwd / cm): 28.58 x 57.20 x 80.01
• Shipping Weight (lbs.): 181.90
• Shipping Weight (kg): 82.51

Item Includes:

• SMX5000XLRT3U UPS system
• USB, DB9 and EPO Cabling
• Mounting hardware for 4 post rackmount installation
• Warranty information
• Instruction manual

Brand