Hikvision DS-K1100 Series Card Reader

Mifare 1 card, with keypad, Communication interface: RS485 and Wiegand output, Anti-dismantle, dustproof, suitable for 120-type surface mounted back box

Product Details

• If the card reader is powered by the controller, the power supply distance is recommended to be no longer than 100m. If the distance is longer than 100m, you are advised to power the card reader with an external 12V (range: -%10 ~ +%10) DC power supply, which is non switched and linear.
• To guarantee communication between the controller and the card reader, you must use an RVVP cable above 0.5 to connect them.
• If the card reader is installed outside or in an environment easy to permeable, it is advisable to install a waterproof shield.
• If you need to install several card readers, the distance between them must be over 30cm.
• To reduce the noise in long-distance transmission, the shield of the cable should connect to the GND of both the controller and card reader terminal.
• Please take care of your card and report card loss at the time when the card is lost.
• If you require a higher security level, use multiple authentication modes.
• Multiple card types are supported. Please select an appropriate card type according to the card performance and the usage scenarios.

Brand