Magnizon APS-10K48SW-M120 10KW Pure Sine Wave Hybrid Inverter

The Magnizon APS-10K48SW-M120 is a powerful 10,000W pure sine wave inverter designed to meet the energy needs of demanding applications. With built-in advanced MPPT solar charge controller and dual operational modes (UPS/Solar), it provides seamless power solutions for off-grid and hybrid solar energy systems. The inverter offers high efficiency, up to 87% in battery mode and 98% in line mode, ensuring minimal energy loss. With a robust design, it is equipped to handle various loads, including resistive and inductive types such as refrigerators, motors, and power tools, as well as sensitive electronics like TVs, computers, and battery chargers. Featuring a 120A MPPT charge controller, a 50A utility charger, and comprehensive protection features, this inverter is suitable for a wide range of applications from residential, commercial, to critical systems requiring reliable and stable power.

Product Features

10KW Continuous Output with 3X Surge Power

The APS-10K48SW-M120 provides 10,000W continuous output with a surge capacity of 30,000W, enabling it to handle large appliances, machinery, and high-demand electrical systems without overloading.

Dual Operational Modes (UPS/Solar)

This inverter offers dual operational modes: UPS mode for seamless grid backup power, and Solar Inverter mode for efficient solar power management. The transition between modes ensures continuous operation, especially during power outages or insufficient sunlight.

Built-in 120A MPPT Solar Charge Controller

The inverter comes with an integrated 120A MPPT solar charge controller that maximizes solar energy harvest and optimizes charging efficiency, enabling reliable power even during cloudy or rainy days.

High Efficiency and Low Idle Current

With efficiencies of >87% in battery mode and >98% in line mode, the APS-10K48SW-M120 minimizes power loss, ensuring high performance and low idle power consumption.

Smart Microcontroller-Based Charging System

The inverter features a microcontroller-based 3-stage charging system, designed to properly charge and maintain a variety of battery types, including VRLA, GEL, Deep Cycle, and others. The charge rate is adjustable, ensuring optimal battery performance based on load requirements.

Pure Sine Wave Output for Sensitive Electronics

It delivers clean and stable pure sine wave output, making it safe for sensitive electronics like computers, medical equipment, and high-end appliances, as well as inductive loads like pumps and compressors.

Configurable AC/Solar Input Priority

Users can configure AC or solar input priority via the LCD display, allowing for flexibility in energy use and ensuring maximum use of solar power when available.

Smart Power Management & Remote Monitoring

The inverter supports remote management with optional SNMP card for IP-based monitoring. It also features dry contact communication for SCADA applications, making it ideal for commercial, industrial, and remote monitoring needs.

Overload, Overcharge, and Short-Circuit Protection

The APS-10K48SW-M120 is equipped with multiple protection mechanisms, including overload, overcharge, and short-circuit protection, ensuring safety and reliability during operation.

Cold Start Function

The inverter features a cold start function, allowing it to start and operate even when no grid or solar power is available, making it highly versatile for all types of setups.

Product Specifications

AC Input Specifications

• Input Waveform: Sinusoidal (Utility or Generator)
• Nominal Voltage: 120V/230V AC
• Input Voltage Range:
  • Low Line Disconnect (120V): 85VAC ±4%
  • High Line Disconnect (120V): 136VAC ±4%
  • Low Line Disconnect (230V): 184VAC ±4%
  • High Line Disconnect (230V): 263VAC ±4%
• Frequency:
  • 50Hz: 41-54Hz
  • 60Hz: 51-64Hz
• Max Input Voltage: 270VAC for 230V
• Efficiency (Battery Mode): >=87%
• Efficiency (Line Mode): >98%

AC Output Specifications

• Output Waveform: Pure sine wave
• Nominal Output Voltage: 230V AC (L-N)
• Output Frequency: 50Hz ±0.3Hz or 60Hz ±0.3Hz
• Power Factor: Unity (1.0)
• Output Voltage Regulation: +/-10% RMS
• Surge Rating: 3x continuous rating (30,000W peak)

Solar Charger Specifications (MPPT)

• Rated Charge Current: 120A
• PV Input Voltage Range: 60-110V DC for 48V system
• Max. PV Open Circuit Voltage: 110V DC for 48V system
• Charger Efficiency: >=97%
• PV Low Voltage Reconnect: PV >= Battery voltage + 3V
• PV Low Voltage Disconnect: PV Disconnect

Battery Charger Specifications

• Nominal Charger Current: 80A
• Charging Current: Adjustable (5 stages)
• Overcharge Protection:
  • For 24V Battery: >=31.0V DC
  • For 48V Battery: >=62.0V DC
• Battery Type Selector: 7 types, including Gel, AGM, Sealed Lead Acid, Calcium, and more.
• De-sulphation Mode: 15.5V for 4hrs (per battery)

System Specifications

• Transfer Time: 6-8ms (max)
• Cooling: Forced air with variable-speed fan
• Protection Features: Low battery, overload, overcharge, short circuit, and over-temperature protection
• Operating Temperature Range: 0°C to +40°C
• Storage Temperature: -15°C to +60°C
• Operating Humidity: 5% to 95% (non-condensing)
• Audible Noise: <60dB
• Dimensions (LxWxH): 627 x 416 x 204 mm
• Net Weight: 59 kg

Applications

Hybrid Solar and Wind Systems

The APS-10K48SW-M120 is perfect for off-grid and hybrid configurations that combine solar, wind, and grid power. It seamlessly integrates renewable energy sources to reduce reliance on traditional grid power, ensuring a stable energy supply.

Telecom and Industrial Applications

Designed for high-demand environments such as telecom, industrial operations, and critical infrastructure, the APS-10K48SW-M120 ensures uninterrupted power for telecom equipment, data centers, ATMs, and more.

Off-Grid and Remote Locations

Whether for remote cabins, farms, or small communities, the APS-10K48SW-M120 provides reliable, renewable power, making it a perfect solution for off-grid energy systems.

Medical & Lifesaving Equipment

Due to its pure sine wave output, this inverter is ideal for powering sensitive medical equipment, offering safe and reliable backup power during emergencies or grid outages.

Small PV Plants and Residential Use

This inverter is also well-suited for small PV plants, residential homes, villas, and small offices, ensuring clean and reliable power for various household and commercial applications.

Safety and Certification

• EMC: Compliant with EN62040-2:2006
• Safety Standards: EN62109-2:2011
• Electrostatic Discharge (ESD): IEC 6100-4-2:2008
• Surge Immunity: IEC 6100-4-5:2014
• Conducted RF Immunity: IEC 6100-4-6:2013
• Voltage DIP: >95% reduction, IEC 6100-4-11:2004
• Voltage Interruption: IEC 6100-4-11:2004

Warranty

• 2-Year Limited Warranty