-25%

Magnizon Pure Sine Wave Inverter 48VDC 230V, 50/60Hz, 5000W – APS-5048SW-LCD

Original price was: KSh200,000.Current price is: KSh150,500. Exc. VAT

48V DC or 230V AC input; 230V, 50 Hz output (hardwired)
5000 watts continuous output, 10000 watts peak output
Microprocessor-controlled Smart-UPS & Solar operational mode
4-Step Progressive Charging & 7-Battery Type Selector
Fully compatible with Solar/Wind solutions for Hybrid configuration
Pure sine wave output with large LCD display
High Efficiency Using Line-Interactive Circuit Topology (Full Bridge Topology)

Category: Solar Inverters Brand: Magnizon

Description

Magnizon Pure Sine Wave Inverter 48VDC 230V, 50/60Hz, 5000W – APS-5048SW-LCD

The Magnizon APS-5048SW-LCD is a high-performance 48V DC to 230V AC pure sine wave inverter that delivers 5000W continuous output with a peak surge capacity of 10,000W. It is ideal for both off-grid and on-grid applications, providing reliable and clean power for a variety of loads, including sensitive electronics and heavy-duty appliances. The inverter is equipped with advanced features such as a microprocessor-controlled 3-stage charging system, wide battery compatibility, and smart power-saving capabilities. With an efficiency of over 88%, low idle current, and a surge rating of 15,000W, the APS-5048SW-LCD is perfect for hybrid systems that integrate solar, wind, or grid power solutions. The large LCD display makes monitoring the system easy and convenient.

Product Features

Pure Sine Wave Output

The APS-5048SW-LCD provides pure sine wave output, which is essential for powering sensitive equipment like computers, medical devices, TVs, and appliances that require stable and clean power.

5000W Continuous Output and 10,000W Peak Surge Power

This inverter delivers 5000W of continuous power, with a peak surge capacity of 10,000W, making it capable of handling a wide range of loads, including motors, pumps, refrigerators, and power tools.

Microprocessor-Controlled Smart UPS & Solar Mode

The APS-5048SW-LCD operates in Smart-UPS and Solar operational modes. Its microprocessor-controlled system ensures seamless switching between grid and solar power, providing reliable energy supply in various conditions.

4-Step Progressive Charging & Battery Type Selector

The inverter features a 4-step progressive charging system, which optimizes the charging process for different types of batteries. It also offers a 7-battery type selector, ensuring compatibility with various battery technologies such as VRLA, AGM, GEL, and Deep Cycle batteries.

Fully Compatible with Hybrid Solar/Wind Solutions

This inverter is fully compatible with solar and wind systems, making it an excellent choice for off-grid applications or as part of a hybrid power configuration. It efficiently integrates renewable energy sources to power homes or businesses.

High Efficiency and Low Idle Current

With an efficiency of over 88% and low idle current consumption, this inverter offers high power conversion while minimizing energy loss, reducing the need for excessive power consumption during low load periods.

LCD Display for Easy Monitoring

The APS-5048SW-LCD features a large LCD display that provides real-time data on input voltage, output voltage, frequency, battery voltage, load, temperature, charge current, and fault status. This allows for easy system monitoring and troubleshooting.

Low Battery and Overcharge Protection

The inverter provides low battery alarms and automatic shut-off at low voltage (40V DC), as well as overcharge protection at 62.8V DC, ensuring the battery is safely maintained.

Product Specifications

Input Voltage (DC): 48V
Input Voltage Range (AC): 164V – 253V AC
Output Power:
- Continuous: 5000W
- Surge Power: 10,000W
Output Waveform: Pure sine wave
Efficiency: >88%
Nominal Output Voltage: 230V AC (L-N)
Output Frequency: 50Hz ±0.3Hz or 60Hz ±0.3Hz
Output Voltage Regulation: +/- 10% RMS
Battery Charge Current: 40A
Low Battery Alarm: 42V DC
Low Battery Trip: 40V DC
High Voltage Alarm: 64V DC
Surge Rating: 10,000W
Cooling: Forced air cooling
Transfer Time: 6-10 ms typical
Bypass Current: 45A max
Power Save Mode: Below 25W when enabled
Charger Voltage:
- Boost Voltage: 14.00V – 15.10V depending on battery type
- Float Voltage: 13.30V – 13.80V depending on battery type
Remote Control/RS232/USB: Yes (optional)

Applications

Hybrid Solar and Wind Systems

The APS-5048SW-LCD is ideal for hybrid systems that combine solar or wind energy with grid power or generator backup. It ensures seamless integration, providing a constant power supply in off-grid applications or during power outages.

Off-Grid and On-Grid Power Systems

Whether used in an off-grid solar power system or as part of a grid-connected setup, this inverter efficiently converts DC power into clean AC power, ensuring reliable electricity supply.

Telecommunication Systems and Critical Applications

The APS-5048SW-LCD is perfect for powering telecom equipment, remote closets, ATM machines, and other critical applications where stable and uninterrupted power is required.

Home Appliances

It can power a variety of household appliances, including refrigerators, air conditioning units, lighting, and other essential devices, providing backup power during outages or serving as the primary energy source in off-grid locations.

Medical and Lifesaving Equipment

The pure sine wave output ensures safe operation of sensitive medical and lifesaving equipment, providing a dependable power source in healthcare facilities, mobile medical units, or emergency response setups.

Environmental and Safety Details