• Store at: -40 to +60 °C
• Install at: -40 to +60 °C, Bend minimum: 5 times O.D.
• Operate at: -40 to +60 °C, Bend minimum: 10 times O.D.
• Pull maximum: 100N

Design

• Conductor: solid bare copper AWG23/1
• Insulation: Cellular polyolefin  (SFS-PE), nominal Ø 1.38 mm
• Pair: No 2 insulated conductors stranded together into a pair
• Colour code: 1. White/blue 2.White/orange 3. White/green 4. White/brown (IEC 708-1)
• Screen 1: Aluminium/polyester or Aluminium/polyester/aluminium tape over each single pair
• Screen 2: overall Tinned Copper Wire Braid
• Outer jacket: Grey Fire Retardant and UV Resistant SHF2 material, LSZH
• Marking : APS Finland – ww/yy – S/FTP 4x2xAWG23/1 Cat.7 LSZH SHF2 – IEC60332-3-22 Cat A – lot + m

Environmental Properties and Fire Performances

• Degree of acidity of gases: IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10μS/mm)
• Halogen acid gas: IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
• Smoke Emission: IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
• Toxicity of evolved gas: EN50305 9.2
• Flame retardant : IEC 60332-1-2
• Fire retardant : IEC 60332-3-22 Cat.A
• Ozone resistant: IEC60811-2-1, DIN VDE 0472 part 805 B
• LSZH SHF2 : IEC 60092-360
• Oil resistant: IEC60811
• Water absorption: IEC60811-1-3
• UV resistant: IEC60811-2-1, ASTM-D-2565-92A
• Cold bend & impact : CSA C22.2, UL44

Electrical characteristics (IEC 60811, EN 50288-4-2)

• Test voltage:  0.7kV a.c. for 1 minute
• Resistance of the conductor @ 20°C : ≤ 14,5 /100m
• Insulation resistance : ≥ 500 MΩxkm (100V-500V)
• Nominal Capacitance @ 800÷1000MHz : 45 pF/m
• Average characteristic impedance: 100 ± 15 Ω @ 1-100MHz
• Transfer impedance : ≤ 3mΩ/m @ 10MHz