Magnizon APS-3024SW-LCD 3000W Pure Sine Wave Hybrid Inverter

The Magnizon APS-3024SW-LCD is a high-performance 3000W pure sine wave inverter designed to provide reliable and clean 230V AC power for various applications. With a peak surge capacity of 6000W, this inverter ensures stable and continuous power supply for both resistive and electronic loads, such as refrigerators, motors, computers, power tools, and battery chargers. The inverter features a smart 3-stage microcontroller-based charging system, making it compatible with different battery types and sizes. Whether used in off-grid or on-grid configurations, it offers seamless integration with solar or wind power systems, making it a perfect solution for hybrid power setups.

Product Features

Pure Sine Wave Output

The APS-3024SW-LCD delivers pure sine wave output, ensuring clean and stable power for sensitive devices like computers, medical equipment, and TVs, as well as resistive loads such as refrigerators and motors.

3000W Continuous Output with 6000W Peak Surge Power

This inverter provides 3000W of continuous power and a peak surge capacity of 6000W, making it capable of handling high-demand appliances like power tools, pumps, and compressors without overloading.

Microprocessor-Controlled Smart-UPS & Solar Operational Mode

The APS-3024SW-LCD operates in Smart-UPS and solar operational modes, allowing for seamless switching between solar, grid, or generator power. It ensures reliable and uninterrupted power, even during power outages or unstable grid conditions.

4-Step Progressive Charging & 7-Battery Type Selector

Equipped with a 4-step progressive charging system and a 7-battery type selector, this inverter ensures efficient charging and maintenance of various battery types, including VRLA, GEL, and deep-cycle batteries.

Fully Compatible with Hybrid Solar/Wind Solutions

The inverter is designed for use with hybrid solar and wind energy systems. It integrates smoothly with renewable energy sources, offering sustainable and reliable power for both off-grid and on-grid applications.

High Efficiency and Low Idle Current

The APS-3024SW-LCD uses a line-interactive circuit topology (Full Bridge Topology) to achieve over 88% efficiency while minimizing idle current consumption, reducing overall energy waste and enhancing performance.

Quiet, High-Efficiency Operation

This inverter operates quietly and efficiently, making it ideal for residential, commercial, and industrial environments where minimal noise is essential for comfort or operational requirements.

CE Certified and Safety Compliant

The APS-3024SW-LCD meets CE safety standards and is equipped with a wide range of protective features, including short-circuit protection, overload protection, and over-temperature shutdown, ensuring safe and reliable operation.

Product Specifications

• Input Voltage (DC): 24V
• Input Voltage Range (AC): 164V – 253V AC
• Output Power:
  • Continuous: 3000W
  • Surge Power: 6000W
• Output Waveform: Pure sine wave
• Efficiency: >88%
• Nominal Output Voltage: 230V AC (L-N)
• Output Frequency: 50Hz ±0.3Hz or 60Hz ±0.3Hz
• Output Voltage Regulation: +/- 10% RMS
• Battery Charge Current: 45A
• Low Battery Alarm: 21V DC
• Low Battery Trip: 20V DC
• High Voltage Alarm: 32V DC
• Surge Rating: 6000W (2 times rated power)
• Cooling: Forced air cooling
• Transfer Time: 6-10 ms typical
• Bypass Current: 40A max
• Power Saver Mode: Below 25W when enabled
• Charger Voltage:
  • Boost Voltage: 14.00V – 15.10V depending on battery type
  • Float Voltage: 13.30V – 13.80V depending on battery type
• Remote Control/RS232/USB: Yes (optional)

Applications

Hybrid Solar and Wind Systems

The APS-3024SW-LCD is ideal for hybrid systems that combine solar, wind, and grid power. It ensures seamless integration of renewable energy sources, reducing reliance on the grid and providing a sustainable energy solution.

Off-Grid and On-Grid Power Systems

Whether used for off-grid living or as part of a grid-connected system, the APS-3024SW-LCD efficiently converts DC power into clean, usable AC power, providing a stable and continuous power supply for homes, businesses, or industrial settings.

Telecom and Critical Applications

The APS-3024SW-LCD is designed to power telecom equipment, remote offices, and other critical applications where continuous and reliable power is necessary. It ensures that equipment such as servers, routers, and ATMs run without interruptions.

Home Appliances

Ideal for powering household appliances like refrigerators, air conditioning units, lighting, and other essential devices, the APS-3024SW-LCD provides a clean and stable power source for residential applications, ensuring reliable operation during power outages.

Medical and Lifesaving Equipment

With its pure sine wave output, the APS-3024SW-LCD is perfect for powering sensitive medical equipment, providing reliable power for healthcare facilities, mobile medical units, and emergency backup systems.

Off-Grid and Remote Locations

The APS-3024SW-LCD is suitable for off-grid systems, such as cabins, farms, or remote homes, where access to the electrical grid is limited. It provides a reliable power source from solar or wind energy, ensuring uninterrupted electricity supply.

Environmental and Safety Details

• Operating Temperature: 0°C to +40°C
• Humidity: 0-95% RH (non-condensing)
• Audible Noise: <60dB
• Safety Certifications: CE, RoHS, EMC, ISO9001, ISO14001
• Cooling: Forced air cooling with temperature-controlled fan

Physical Details

• Size (HWD): 442 x 218 x 179 mm
• Weight: 23 kg
• Warranty: 2-Year Limited Warranty (extendable up to 4 years)

Certifications

• Electromagnetic Compatibility (EMC): Compliant with various IEC standards
• Harmonic Current Emission: EN61000-3-12: 2011
• Voltage Fluctuations & Flickering: EN61000-3-11: 2000
• Electrostatic Discharge (ESD): IEC 6100-4-2:2008
• Surge Immunity: IEC 6100-4-5:2014