Magnizon-Pure Sine Wave Inverter 12vdc 230v, 50/60hz, 3000w – Aps-3024sw-M60

Magnizon APS-M series inverter/charger with dual operational modes with built-in Advanced MPPT solar charge controller minimizes the hassles of Solar installation especially in hybrid environments.

Large LCD display with functional keys to select various parameters and displays real-time information, selecting the modes of operation, Battery charger current settings, etc along with operational schemes.

Daytime will be supported through solar panels and nighttime or rainy days will be with batteries and Utility power with intelligent microprocessor-based automatic switching.

Reliable pure copper-based transformer with advanced IGBT technology design and frequency controlled power, very much compatible with all varieties of loads: resistive/inductive loads such as refrigerators, motors, pumps, compressors, and laser printers as well as electronic loads like TVs, Computers, power tool, and battery chargers.

Smart microcontroller-based 3-stage built-in charging system properly charges and maintains battery bank in the obscene of solar power or rainy days. The charge rate is selectable so you can use a variety of battery sizes and types to fit your backup time requirements.

Key Features

• Well designed for Off-grid/hybrid applications where solar energy systems are connected along with grid or generator sets.
• Versatile inverter/charger with pure sine wave system with seamless transfer switching serves as an automotive inverter for RVs, trucks, and standalone alternative power source with high-end backup times with various battery technologies(VRLA, GEL, Deep cycle, Ni-Cd, and many more)
• Perfectly suitable for Off-grid and Hybrid applications.
• Telecom, industrial, and ATM applications
• Small PV plants for houses/villas and small offices.
• Remote closets and small computer room applications.
• Mining, fluid flow management, Oil & gas applications.

Applications

• 24V DC or 230V AC input; 230V, 50 Hz output (hardwired)
• 1KW/2KW/3KW continuous output with double boost capacity.
• Microprocessor Smart volume design
• Built-in power management software and communication cable with the unit
• Dry contact communications system for remote management & SCADA applications
• Automatic generator start/stop function
• Built-in 60Amp -MPPT solar charge controller and strong Utility charger rating up to 50Amp
• Duel Operational Mode UPS/ Solar Inverter Mode
• Robust design for Hybrid configuration
• Pure sine wave output
• High Efficiency Using Line-Interactive Circuit Topology(Full Bridge Topology)
• Quiet, high-efficiency operation, high surge capacity, and low idle current
• CE Safety
• Selectable input voltage range and frequency according to city power in your country
• Charging current is settable according to your battery type
• Configurable AC/Solar input priority via LCD setting
• Compatible with mains voltage or generator power
• Auto restart while AC is recovering
• Overload, over temperature, and short circuit protection
• Smart charging system optimizes battery performance
• Cold start function

Product Specifications

AC INPUT

• Input Voltage Waveform: Sinusoidal (utility or generator)
• Nominal Input Voltage: 120/230VAC
• Low Line Disconnect:
  • 85Vac +/-4% (Normal) or 80Vac +/-4% (Wide) for 120V
  • 184Vac +/-4% (Normal) or 135Vac +/-4% (Wide) for 230V
• High Line Disconnect:
  • 136Vac +/-4% (Normal) or 140Vac +/-4% (Wide) for 120V
  • 263Vac +/-4% (Normal) or 263Vac +/-4% (Wide) for 230V
• Max AC Input Voltage: Max 270Vac for 230V
• Frequency:
  • 50Hz: 41-54Hz
  • 60Hz: 51-64Hz

AC OUTPUT

• Output Voltage Waveform: Pure Sine wave
• Power Factor: Unity (1.0)
• Nominal Output Voltage (V): HV: 230Vac +/- 10% rms
• Nominal Output Frequency (Hz):
  • 50Hz +/- 0.3Hz
  • 60Hz +/- 0.3Hz

SOLAR CHARGER SPECS (MPPT)

• Rated Charge Current: 60A
• PV Input Voltage Range: 30VDC-55VDC for 24VDC
• Max. PV Open Circuit Array Voltage: 55Vdc for 24V DC
• Charger Technology: Advanced MPPT technology
• PV Low Voltage Re-connect: PV >= Bat. V + 3V
• PV Low Voltage Disconnect: PV
• Efficiency: >/=97%

AC MODE CHARGER SPECS

• Nominal Charger Current: 50A
• Nominal Charger Current: 5 stages adjustable charging current
• Overcharge Protection:
  • Bat.V >= 31.0VDC for 24V battery
  • Battery beeps 0.5s every 1s & fault after 60s

EFFICIENCY

• Efficiency (Battery Mode): >/=87%
• Efficiency (Line Mode): >/=98%

BATTERY VOLTAGE

• Nominal DC Input Voltage: 24/48VDC
• Low Battery Alarm: 21VDC +/- 0.6VDC for 24VDC
• High DC Input Alarm & Fault: 32VDC +/- 0.6VDC for 24VDC
• Transfer Time: 6-8ms (max)

SYSTEM SPECS

• Over-Load Protection: 110-150%, beeps 0.5s every 1s, and Fault after 20s
• Output Short Circuit Protection: Current limit (Fault after 10s)
• Surge Rating (10s): 1:3 (VA)
• Power Saver: Load
• Protections: Low battery, overcharging, overload, overtemp
• Operating Temperature Range: 0 to 40°C
• Storage Temperature: -15 to 60°C
• Operating Humidity: 5% to 95% (non-condensing)
• Audible Noise: 60dB max
• Cooling: Forced air, variable speed fan
• Dimensions (LWH): 480336190mm
• Net Weight (kg): 28

Warranty

• 2-Year limited warranty extendable up to 4 years

Safety

• EMC/CE/ROHS/ISO9001/ISO14001

CERTIFICATION/CONFORMITY

• Disturbance at Mains Terminals: EN61000-6-3:2007+ A1: 2011+ AC:2012
• Radiated Disturbance: EN61000-6-3:2007+ A1: 2011+ AC:2012
• Harmonic Current Emission: EN61000-3-12: 2011
• Voltage Fluctuations & Flickering: EN61000-3-11: 2000
• Electrostatic Discharge (ESD): IEC 6100-4-2:2008
• Radio-frequency & Continuous Radiated Disturbances: IEC 6100-4-3:2006 + A1:2007 + A2:2010
• EFT/B Immunity: IEC 6100-4-4:2012
• Surge Immunity: IEC 6100-4-5:2014
• Conducted RF Immunity: IEC 6100-4-6:2013
• Power Frequency Magnetic Field: IEC 6100-4-8:2009
• Voltage DIP >95% Reduction: IEC 6100-4-11:2004
• Voltage DIP >30% Reduction: IEC 6100-4-11:2004
• Voltage Interruption: IEC 6100-4-11:2004

Brand