-6%

Magnizon-Pure Sine Wave Inverter 12vdc 230v, 50/60hz, 1000w – Aps-1012sw-Lcd

Original price was: KSh100,000.Current price is: KSh93,800. Exc. VAT

12V DC or 230V AC input; 230V, 50 Hz output (hardwired)
1000 watts continuous output, 2000 watts peak output
Microprocessor-controlled Smart-UPS & Solar operational mode
4-Step Progressive Charging & 7-Battery Type Selector
Fully compatible with Solar/Wind solutions for Hybrid configuration
Pure sine wave output with large LCD display
High Efficiency Using Line-Interactive Circuit Topology(Full Bridge Topology)

IMPORTANT NOTICE !!!

Confirm prices and availability of an item before committing an order
Customers can order via sales@rapidtech.co.ke or call/WhatsApp/SMS +254722555289 ; +254755555289
We cannot guarantee 100% accuracy of product information on this page
Refer our terms and conditions before using our services

Description
Reviews (0)

Magnizon-Pure Sine Wave Inverter 12vdc 230v, 50/60hz, 1000w – Aps-1012sw-Lcd

Magnizon Pure Sine Wave inverter APS-1012SW-LCD provides power for all your alternative energy needs. This inverter/charger supplies 1000 watts of continuous 230V /50Hz AC power.

Reliable large pure copper-based transformer design and frequency-controlled power, very much compatible with all varieties of loads: resistive loads such as refrigerators, motors, pumps, compressors, and laser printers as well as electronic loads like TVs, Computers, power tools, and battery chargers.

Smart microcontroller-based 3-stage charging system properly charges and maintains battery bank. The charge rate is selectable so you can use a variety of battery sizes and types to fit your backup time requirements

Key Features

12V DC or 230V AC input; 230V, 50 Hz output (hardwired)
1000 watts continuous output, 2000 watts peak output
Microprocessor-controlled Smart-UPS & Solar operational mode
4-Step Progressive Charging & 7-Battery Type Selector
Fully compatible with Solar/Wind solutions for Hybrid configuration
Pure sine wave output with large LCD display
High Efficiency Using Line-Interactive Circuit Topology(Full Bridge Topology)
Quiet, high-efficiency operation, high surge capacity, and low idle current
CE Safety

Applications

Well designed for hybrid applications where solar/wind energy systems are connected along with grid or generator sets without using any relay and control mechanism.
Versatile inverter/charger with pure sine wave system with seamless transfer switching serves as an automotive inverter for RVs, trucks, and standalone alternative power source with high-end backup times with various battery technologies(VRLA, GEL, Deep cycle, Ni-Cd, and many more)
Off-grid and On-grid applications.
Telecom and ATM applications.
Remote closets and small computer room applications.
Petrochemical application
Critical applications where higher reliability is needed
Medical & lifesaving equipment
SMB requirements

Product Specifications

Input Specification

Input Wave Form: Sine wave (Utility or Generator)
Nominal Voltage: 230V AC
Low Voltage Trip: 154V +/- 4%
Low Voltage Re-engage: 164V +/- 4%
High Voltage Trip: 253V +/- 4%
High Voltage Re-engage: 243V +/- 4%
Max Input AC Voltage: 270V
Nominal Input Frequency: 50Hz or 60Hz (Auto detect)
Low Frequency Trip:
- 47Hz for 50Hz
- 57Hz for 60Hz
High Frequency Trip:
- 55Hz for 50Hz
- 65Hz for 60Hz

Output Waveform (Bypass Mode)

Same as Input

Protection

Overload Protection: Circuit breaker
Short Circuit Protection: Circuit breaker

Efficiency

On-Line Transfer Mode: 0.95
Line Transfer Time: 10 mSec Typical

Bypass

Bypass without Battery Connected: Yes
Max Bypass Current: 40Amp

Inverter Specification / Output

Output Waveform: Pure Sine wave
Output Continuous Power in Watts: 1000
Output Continuous Power in VA: 1000
Power Factor: 1
Nominal Output Voltage RMS: 230V AC (L-N)
Output Voltage Regulation: +/-10% rms
Output Frequency: 50Hz +/-0.3Hz or 60Hz +/-0.3Hz
Nominal Efficiency: >88%
Surge Rating: 3000
Short Circuit Protection: Yes, fault after 10sec

Inverter Specification / Input

Nominal Input Voltage DC: 12V
Minimum Start Voltage DC: 10V
Low Battery Alarm: 10.5V
Low Battery Trip: 10V
High Voltage Alarm: 16V
Power Saver: Below 25W when enabled
Power Saver Switched On/Off Remotely: Same

Charger Mode Specification

AC Input Voltage Range: 164-253V AC
Output Voltage (DC): Depends on battery type
Battery Charge Current: 35Amp
Battery Initial Voltage for Start-Up: 0-15.7V DC
Overcharge Protection Shutdown: 15.7V DC

Battery Type

Gel USA Boost Voltage (Per Battery): 14
AGM.1 Boost Voltage (Per Battery): 14.1
AGM.2 Boost Voltage (Per Battery): 14.6
Sealed Lead Acid Boost Voltage (Per Battery): 14.4
Gel Euro Boost Voltage (Per Battery): 14.4
Open Lead Acid Boost Voltage (Per Battery): 14.8
Calcium Boost Voltage (Per Battery): 15.1
Gel USA Float Voltage (Per Battery): 13.7
AGM.1 Float Voltage (Per Battery): 13.4
AGM.2 Float Voltage (Per Battery): 13.7
Sealed Lead Acid Float Voltage (Per Battery): 13.6
Gel Euro Float Voltage (Per Battery): 13.8
Open Lead Acid Float Voltage (Per Battery): 13.3
Calcium Float Voltage (Per Battery): 13.6
De-sulphation: 15.5 for 4hrs

Connectivity / Cables

Remote Control/RS232/USB: Yes (Optional)

Physical Details

Size (in mm): 442x218x179
Weight: 14kgs

Warranty

Warranty: 2-Year Limited Warranty (Extendable up to 4 years)

Safety and Certification/Conformity

Safety: EMC/CE/ROHS/ISO9001
Certification/Conformity:
- Disturbance at Mains Terminals: EN61000-6-3:2007+ A1: 2011+ AC:2012
- Radiated Disturbance: EN61000-6-3:2007+ A1: 2011+ AC:2012
- Harmonic Current Emission: EN61000-3-12: 2011
- Voltage Fluctuations & Flickering: EN61000-3-11: 2000
- Electrostatic Discharge (ESD): IEC 6100-4-2:2008
- Radio-frequency & Continuous Radiated Disturbances: IEC 6100-4-3:2006 + A1:2007 + A2:2010
- EFT/B Immunity: IEC 6100-4-4:2012
- Surge Immunity: IEC 6100-4-5:2014
- Conducted RF Immunity: IEC 6100-4-6:2013
- Power Frequency Magnetic Field: IEC 6100-4-8:2009
- Voltage DIP: >95% reduction, IEC 6100-4-11:2004
- Voltage DIP: >30% reduction, IEC 6100-4-11:2004
- Voltage Interruption: IEC 6100-4-11:2004