Mecer ME-10000-WPTU UPS, 10KVA Pro Online Tower Smart UPS

Product Features

• MODEL: ME-10000-WPTU
• PHASE: Single phase with ground
• CAPACITY: 10000VA / 8000W (with AVR, Monitoring Software + Cable & Built-in Surge Protection) – Black

INPUT

Voltage Range

• Low Line Transfer: 176 VAC ± 3% @ 100% load, 110 VAC ± 3% @ 50% load
• Low Line Comeback: 186 VAC ± 3% @ 100% load, 120 VAC ± 3% @ 50% load
• High Line Transfer: 300 VAC ± 3%
• High Line Comeback: 290 VAC ± 3%
• Frequency Range: 46~54 Hz or 56~64 Hz
• Power Factor: ≧99 @ 100%load

OUTPUT

• Output Voltage: 208/220/230/240 VAC
• AC Voltage Regulation (Batt. Mode): ± 1%
• Frequency Range (Synchronized Range): 46~54 Hz or 56~64 Hz
• Frequency Range (Batt. Mode): 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz
• Current Crest Ratio: 3:1

Transfer Time

• AC Mode to Batt. Mode: Zero
• Inverter to Bypass: Zero
• Waveform (Batt. Mode): Pure Sinewave
• Harmonic Distortion: ≦ 3 % THD (Linear Load),≦ 5 % THD (Non-linear Load)

EFFICIENCY

• AC Mode: 93%
• Battery Mode: 91%

BATTERY

• Battery Type: 12 V / 9 Ah
• Numbers: 16
• Typical Recharge Time: 9 hours recover to 90% capacity
• Charging Current (max.): 1.0 A / 2.0 A (adjustable)
• Charging Voltage: 218.4 VDC ±1%

INDICATORS

• LCD Panel: UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions

ALARM

• Battery Mode: Sounding every 4 seconds
• Low Battery: Sounding every second
• Overload: Sounding twice every second
• Fault: Continuously sounding

PHYSICAL

• Dimension, D x W x H (mm): 442 x 190 x 688
• Net Weight (kgs): 66

ENVIRONMENT

• Humidity: 0-95 % RH @ 0- 40°C (non-condensing)
• Noise Level: Less than 58dB @ 1 Meter

MANAGEMENT

• Smart RS-232/USB: Supports Windows 2000/2003/XP/Vista/ 2008, Windows 7/8, Linux, Unix, and MAC
• Optional SNMP: Power management from SNMP manager and web browser

NOTE 1: Derate to 80% of capacity in CVCF mode or when the output voltage is adjusted to 200/208VAC.

NOTE 2: If the UPS is installed or used in a place where the altitude is above than 1000m, the output power must be derated one percent per 100m.

Brand