Netis 4GE PoE + 1GE + 1GE SFP Uplink Switch (P106GC)

The Netis 6 port P106GC is a high-performance PoE-enabled switch designed for small to medium networks that require both power and data over a single connection. It features four Gigabit PoE ports, one Gigabit uplink port, and one SFP slot, making it ideal for IP cameras, access points, and other powered devices. With a built-in 60W power supply and support for IEEE 802.3af/at standards, each PoE port can deliver up to 30W while ensuring network stability and protection. Its robust switching capacity, MAC address auto-learning, and flexible VLAN and watchdog modes make it a versatile and reliable solution for business and surveillance networks.

Product Features

Gigabit PoE Connectivity

Four 10/100/1000Mbps PoE ports provide both data and power to connected devices, supporting IEEE 802.3af/at standards with a maximum of 30W per port.

Flexible Uplink and SFP Support

One Gigabit uplink port and one SFP slot allow seamless integration into larger network infrastructures for high-speed, fiber-optic connectivity.

Intelligent Switching

Supports Normal Mode, Port VLAN, and Watchdog Mode to optimize traffic management and enhance network stability.

Auto-Negotiation and Plug-and-Play

All ports support Auto MDI/MDI-X, enabling simple plug-and-play setup without manual configuration.

Reliable Performance

12Gbps switching capacity, store-and-forward transmission, and MAC address auto-learning and aging provide efficient and stable network performance.

Advanced Protection

Built-in over-current, over-voltage, and short-circuit protection, along with sequential boot-up and soft start for high-power devices, ensures safety for both the switch and connected devices.

Product Specifications

• Ports: 4 × 10/100/1000M PoE ports, 1 × 10/100/1000M uplink RJ45 port, 1 × SFP slot
• PoE Standards: IEEE 802.3af/at compliant
• Maximum PoE Power: 30W per port, 60W total
• Switching Capacity: 12Gbps
• MAC Address Table Size: 2K
• Jumbo Frame: 2048 bytes
• Transmission Method: Store-and-forward
• Data Transfer Rates:
  • Ethernet: 10Mbps (Half/Full Duplex)
  • Fast Ethernet: 100Mbps (Half/Full Duplex)
  • Gigabit Ethernet: 1000Mbps (Full Duplex)
• Flow Control: IEEE 802.3x Full Duplex / Backpressure Half Duplex
• VLAN & Watchdog Mode: Supported
• MAC Address Learning: Auto-learning & auto-aging
• Standards Supported:
  • IEEE 802.3 10BASE-T
  • IEEE 802.3i 10BASE-T Ethernet
  • IEEE 802.3u 100BASE-TX
  • IEEE 802.3ab 1000BASE-T
  • IEEE 802.3af/at PoE
  • IEEE 802.3x Flow Control
• Cabling Type: Cat5e or higher for 10/100/1000Mbps (≤100m)
• Power Input: AC 100~240V, 50-60Hz
• Operating Temperature: 0℃ ~ 40℃
• Storage Temperature: -40℃ ~ 70℃
• Operating Humidity: 10% ~ 90% RH non-condensing
• Storage Humidity: 5% ~ 90% RH non-condensing
• Dimensions (L × W × H): 125 × 115 × 34 mm